MPH series
Maximum working pressure up to 1 MPa (10 bar) - Flow rate up to 3500 l/min
Return  lters
Return  lters
209
MPH
- Head
Aluminium: MPH 110-114-116-120-250
Anodized Aluminium: MPH 630-850
Painted Aluminium: MPH 660
- Cover
Polyamide: MPH 110-114-116-120
Aluminium: MPH 250
Anodized Aluminium: MPH 630
Painted Aluminium: MPH 660
Steel: MPH 850
- Insert assembly
Polyamide: MPH 110-114-116-120
Aluminium: MPH 250-630-660-850
- Diffuser: Stainless Steel
- Valve: Phosphatized Steel
Filter housing materials
- Opening pressure 175 kPa (1.75 bar)±10%
- Opening pressure 250 kPa (2.5 bar) ±10%, except for MPH 850
Bypass valve
From -25 °C to +110 °C
Temperature
- Microbre lter elements - series MR: 10 bar
- Fluid ow through the lter element from IN to OUT
∆p element type
- Standard NBR series A
- Optional FPM series V
Seals
MPH lters are provided
for vertical mounting
Note
Maximum working pressure up to 1 MPa (10 bar)
Flow rate up to 3500 l/min
GENERAL INFORMATION
Description Technical data
Return lter
MPH is a range of return lters for protection of the reservoir against
the system contamination.
They are directly xed to the reservoir, in immersed or semi-immersed
position.
The use of the diffuser is recommended, to place the lter output
always immersed into the uid to avoid aeration or foam generation
into the reservoir.
The filtration from inside to outside allows a cleaner filter element
replacement, the dirty remains into the lter element.
Available features:
- Female threaded connections up to 1 1/2” and anged connections
up to 4”, for a maximum ow rate of 3500 l/min
- Multiple connections, to connect several return lines or drains
- Fine ltration rating, to get a good cleanliness level into the reservoir
- Bypass valve, to relieve excessive pressure drop across the lter media
- Magnetic lter, to hold the ferrous particles
- 2, 3, 4 or 8 xing holes for installation, to suit a variety of reservoir
surfaces
- Flat Seal to suit a variety of reservoir surfaces
- Oil dipstick, to easily check the level of the fluid into the reservoir
(separate item)
- Diffuser, to reduce the risk of aeration, foaming and noise
- Filler plug, to ll cleaned uid into the tank without an additional plug
- Integrated breather lter, to clean the air that moves into the reservoir
as result of the oil level uctuation (MPH110/114)
- Integrated breather filter with pressurization valve, to clean the air
that moves into the reservoir as result of the oil level uctuation and to
guarantee the pressurization into the reservoir (MPH110/114)
- Visual, electrical and electronic clogging indicators
Common applications:
Heavy duty industrial equipment
Weights [kg] and volumes [dm
3
]
1.60 1.70 1.80 2.20 2.60
1.60 1.70 1.80 2.20 2.60
1.60 1.70 1.80 2.20 2.60
1.60 1.70 1.80 2.20 2.60
3.60 3.90 4.20 5.60 -
6.50 7.00 7.40 8.50 10.50
- - - 11.50 14.00
32.00 35.00 38.00 42.00 -
1 2 3 4 5
1.60 1.70 1.80 2.20 2.60
1.60 1.70 1.80 2.20 2.60
1.60 1.70 1.80 2.20 2.60
1.60 1.70 1.80 2.20 2.60
4.40 4.40 5.40 8.00 -
7.30 9.00 11.00 13.00 19.20
- - - 14.60 21.00
13.00 16.50 21.00 25.00 -
1 2 3 4 5Length Length
Weights [kg]
MPH 110
MPH 114
MPH 116
MPH 120
MPH 250
MPH 630
MPH 660
MPH 850
Volumes [dm
3
]
Filter series
Return lters
210
MPHGENERAL INFORMATION
Flow rates [l/min
]
Hydraulic symbols
MPH 110
MPH 114
MPH 116
MPH 120
MPH 250
MPH 630
MPH 660
MPH 850
Style 2 connections Style 3 connectionsStyle 1 connection Filter series
•
•
•
••
• - -
--
-
-
-
-
• - -
- -
-
-
••
•
IN IN IN
Aux
IN2IN IN1
Aux
LengthFilter series
M25
A03 A06 A10 A16 A25 M60 P10 P25
M90
1
2
3
4
5
MPH
110-114
116-120
1
2
3
4
1
2
3
4
4
5
1
2
3
4
5
MPH 250
MPH 850
MPH 660
MPH 630
Maximum ow rate for a complete return lter with a pressure drop ∆p = 0.5 bar.
The reference uid has a kinematic viscosity of 30 mm
2
/s (cSt) and a density of 0.86 kg/dm
3
.
For different pressure drop or uid viscosity we recommend to use our selection software available on www.mpltri.com.
You can also calculate the right size using the formulas present on the FILTER SIZING paragraph at the beginning of the full catalogue or at the beginning of the lter family brochure.
Please, contact our Sales Department for further additional information.
26 29 72 79 107 282 164 190
43 46 112 114 161 318 164 190
64 72 132 156 178 324 219 251
90 99 184 198 216 324 266 302
117 128 201 219 244 324 282 318
93 102 210 251 315 1093 339 383
124 151 327 412 421 1122 460 514
189 221 418 445 500 1137 544 616
261 304 592 670 766 1166 832 923
775 1041 1246 1568 2242 3311 2371 2625
1176 1522 1682 1747 2449 3378 2684 2886
1490 1914 1995 2014 3035 3405 3144 3220
1668 2088 2305 2363 3169 3517 3272 3378
370 399 903 1042 1460 2376 1596 1830
624 699 1282 1343 1997 2663 2182 2331
160 200 369 423 518 1894 565 632
240 257 571 611 1045 1929 1137 1285
330 374 745 788 1308 1938 1416 1577
374 403 887 1010 1348 1956 1448 1612
625 698 1210 1257 1723 2121 1839 1929
Return lters
211
MPH GENERAL INFORMATION
Pressure drop
Filter housings ∆p pressure drop
0.1
0.075
0.05
0.025
0
0
80
160 240
320
400
MPH 110 - 114 - 116 - 120
3/4”
1 1/4”
1”
0.16
0.12
0.08
0.04
0
MPH 250
0 120
240
360
480
600
1 1/4”
0.16
0.12
0.08
0.04
0
MPH 630
0 240 480 720
960
1200
1 1/2”
0.40
0.30
0.20
0.10
0
MPH 850
0
600
1200 1800
2400
3000
0.40
0.30
0.20
0.10
0
MPH 660
0
480
960 1440 1920
2400
4”
3”
DN 100
Valves
Bypass valve pressure drop
MPH 110 - 114 - 116 - 120
5
3.75
2.5
1.25
0
0
80 160
240 320 400
2.5 bar
1.75 bar
MPH 250
4
3
2
1
0
0
120 240
360
480 600
2.5 bar
1.75 bar
MPH 630 - 660
5
3.75
2.5
1.25
0
MPH 850
0 600 1200 1800 2400 3000
6
4.5
3
1.5
0
0 240 480
720 960 1200
1.75 bar
2.5 bar
1.75 bar
Air breather
Pressure drop
MPH 110 - 114
0.02
0.015
0.01
0.005
0
0
60 120
180 240
300
1: C
With air breather 10 µm
2: D
With anti-splash and SAP50 10 µm
2
1
0.1
0.075
0.05
0.025
0
0
80
160 240
320
400
MPH 110 - 114 - 116 - 120
3/4”
1 1/4”
1”
0.16
0.12
0.08
0.04
0
MPH 250
0 120
240
360
480
600
1 1/4”
0.16
0.12
0.08
0.04
0
MPH 630
0 240 480 720
960
120
0
1 1/2”
0.40
0.30
0.20
0.10
0
MPH 850
0
600
1200 1800
2400
3000
0.40
0.30
0.20
0.10
0
MPH 660
0
480
960 1440 1920
2400
4”
3”
DN 100
Valves
Bypass valve pressure drop
MPH 110 - 114 - 116 - 120
5
3.75
2.5
1.25
0
0
80 160
240 320 400
2.5 bar
1.75 bar
MPH 250
4
3
2
1
0
0
120 240
360
480 600
2.5 bar
1.75 bar
MPH 630 - 660
5
3.75
2.5
1.25
0
MPH 850
0 600 1200 1800 2400 3000
6
4.5
3
1.5
0
0 240 480
720 960 1200
1.75 bar
2.5 bar
1.75 bar
Air breather
Pressure drop
MPH 110 - 114
0.02
0.015
0.01
0.005
0
0
60 120
180 240
300
1: C
With air breather 10 µm
2: D
With anti-splash and SAP50 10 µm
2
1
0.1
0.075
0.05
0.025
0
0
80
160 240
320
400
MPH 110 - 114 - 116 - 120
3/4”
1 1/4”
1”
0.16
0.12
0.08
0.04
0
MPH 250
0 120
240
360
480
600
1 1/4”
0.16
0.12
0.08
0.04
0
MPH 630
0 240 480 720
960
1200
1 1/2”
0.40
0.30
0.20
0.10
0
MPH 850
0
600
1200 1800
2400
3000
0.40
0.30
0.20
0.10
0
MPH 660
0
480
960 1440 1920
240
0
4”
3”
DN 100
Valves
Bypass valve pressure drop
MPH 110 - 114 - 116 - 120
5
3.75
2.5
1.25
0
0
80 160
240 320 400
2.5 bar
1.75 bar
MPH 250
4
3
2
1
0
0
120 240
360
480 600
2.5 bar
1.75 bar
MPH 630 - 660
5
3.75
2.5
1.25
0
MPH 850
0 600 1200 1800 2400 3000
6
4.5
3
1.5
0
0 240 480
720 960 1200
1.75 bar
2.5 bar
1.75 bar
Air breather
Pressure drop
MPH 110 - 114
0.02
0.015
0.01
0.005
0
0
60 120
180 240
300
1: C
With air breather 10 µm
2: D
With anti-splash and SAP50 10 µm
2
1
0.1
0.075
0.05
0.025
0
0
80
160 240
320
400
MPH 110 - 114 - 116 - 120
3/4”
1 1/4”
1”
0.16
0.12
0.08
0.04
0
MPH 250
0 120
240
360
480
600
1 1/4”
0.16
0.12
0.08
0.04
0
MPH 630
0 240 480 720
960
1200
1 1/2”
0.40
0.30
0.20
0.10
0
MPH 850
0
600
1200 1800
2400
300
0
0.40
0.30
0.20
0.10
0
MPH 660
0
480
960 1440 1920
2400
4”
3”
DN 100
Valves
Bypass valve pressure drop
MPH 110 - 114 - 116 - 120
5
3.75
2.5
1.25
0
0
80 160
240 320 400
2.5 bar
1.75 bar
MPH 250
4
3
2
1
0
0
120 240
360
480 600
2.5 bar
1.75 bar
MPH 630 - 660
5
3.75
2.5
1.25
0
MPH 850
0 600 1200 1800 2400 3000
6
4.5
3
1.5
0
0 240 480
720 960 1200
1.75 bar
2.5 bar
1.75 bar
Air breather
Pressure drop
MPH 110 - 114
0.02
0.015
0.01
0.005
0
0
60 120
180 240
300
1: C
With air breather 10 µm
2: D
With anti-splash and SAP50 10 µm
2
1
0.1
0.075
0.05
0.025
0
0
80
160 240
320
400
MPH 110 - 114 - 116 - 120
3/4”
1 1/4”
1”
0.16
0.12
0.08
0.04
0
MPH 250
0 120
240
360
480
600
1 1/4”
0.16
0.12
0.08
0.04
0
MPH 630
0 240 480 720
960
1200
1 1/2”
0.40
0.30
0.20
0.10
0
MPH 850
0
600
1200 1800
2400
3000
0.40
0.30
0.20
0.10
0
MPH 660
0
480
960 1440 1920
2400
4”
3”
DN 100
Valves
Bypass valve pressure drop
MPH 110 - 114 - 116 - 120
5
3.75
2.5
1.25
0
0
80 160
240 320 400
2.5 bar
1.75 bar
MPH 250
4
3
2
1
0
0
120 240
360
480 600
2.5 bar
1.75 bar
MPH 630 - 660
5
3.75
2.5
1.25
0
MPH 850
0 600 1200 1800 2400 3000
6
4.5
3
1.5
0
0 240 480
720 960 120
0
1.75 bar
2.5 bar
1.75 bar
Air breather
Pressure drop
MPH 110 - 114
0.02
0.015
0.01
0.005
0
0
60 120
180 240
300
1: C
With air breather 10 µm
2: D
With anti-splash and SAP50 10 µm
2
1
0.1
0.075
0.05
0.025
0
0
80
160 240
320
400
MPH 110 - 114 - 116 - 120
3/4”
1 1/4”
1”
0.16
0.12
0.08
0.04
0
MPH 250
0 120
240
360
480
600
1 1/4”
0.16
0.12
0.08
0.04
0
MPH 630
0 240 480 720
960
1200
1 1/2”
0.40
0.30
0.20
0.10
0
MPH 850
0
600
1200 1800
2400
3000
0.40
0.30
0.20
0.10
0
MPH 660
0
480
960 1440 1920
2400
4”
3”
DN 100
Valves
Bypass valve pressure drop
MPH 110 - 114 - 116 - 120
5
3.75
2.5
1.25
0
0
80 160
240 320 400
2.5 bar
1.75 bar
MPH 250
4
3
2
1
0
0
120 240
360
480 600
2.5 bar
1.75 bar
MPH 630 - 660
5
3.75
2.5
1.25
0
MPH 850
0 600 1200 1800 2400 3000
6
4.5
3
1.5
0
0 240 480
720 960 1200
1.75 bar
2.5 bar
1.75 bar
Air breather
Pressure drop
MPH 110 - 114
0.02
0.015
0.01
0.005
0
0
60 120
180 240
300
1: C
With air breather 10 µm
2: D
With anti-splash and SAP50 10 µm
2
1
Bypass valve pressure drop
Air breather pressure drop
0.1
0.075
0.05
0.025
0
0
80
160 240
320
400
MPH 110 - 114 - 116 - 120
3/4”
1 1/4”
1”
0.16
0.12
0.08
0.04
0
MPH 250
0 120
240
360
480
600
1 1/4”
0.16
0.12
0.08
0.04
0
MPH 630
0 240 480 720
960
1200
1 1/2”
0.40
0.30
0.20
0.10
0
MPH 850
0
600
1200 1800
2400
3000
0.40
0.30
0.20
0.10
0
MPH 660
0
480
960 1440 1920
2400
4”
3”
DN 100
Valves
Bypass valve pressure drop
MPH 110 - 114 - 116 - 120
5
3.75
2.5
1.25
0
0
80 160
240 320 400
2.5 bar
1.75 bar
MPH 250
4
3
2
1
0
0
120 240
360
480 600
2.5 bar
1.75 bar
MPH 630 - 660
5
3.75
2.5
1.25
0
MPH 850
0 600 1200 1800 2400 3000
6
4.5
3
1.5
0
0 240 480
720 960 1200
1.75 bar
2.5 bar
1.75 bar
Air breather
Pressure drop
MPH 110 - 114
0.02
0.015
0.01
0.005
0
0
60 120
180 240
300
1: C
With air breather 10 µm
2: D
With anti-splash and SAP50 10 µm
2
1
0.1
0.075
0.05
0.025
0
0
80
160 240
320
400
MPH 110 - 114 - 116 - 120
3/4”
1 1/4”
1”
0.16
0.12
0.08
0.04
0
MPH 250
0 120
240
360
480
600
1 1/4”
0.16
0.12
0.08
0.04
0
MPH 630
0 240 480 720
960
1200
1 1/2”
0.40
0.30
0.20
0.10
0
MPH 850
0
600
1200 1800
2400
3000
0.40
0.30
0.20
0.10
0
MPH 660
0
480
960 1440 1920
2400
4”
3”
DN 100
Valves
Bypass valve pressure drop
MPH 110 - 114 - 116 - 120
5
3.75
2.5
1.25
0
0
80 160
240 320 400
2.5 bar
1.75 bar
MPH 250
4
3
2
1
0
0
120 240
360
480 600
2.5 bar
1.75 bar
MPH 630 - 660
5
3.75
2.5
1.25
0
MPH 850
0 600 1200 1800 2400 3000
6
4.5
3
1.5
0
0 240 480
720 960 1200
1.75 bar
2.5 bar
1.75 bar
Air breather
Pressure drop
MPH 110 - 114
0.02
0.015
0.01
0.005
0
0
60 120
180 240
300
1: C
With air breather 10 µm
2: D
With anti-splash and SAP50 10 µm
2
1
0.1
0.075
0.05
0.025
0
0
80
160 240
320
400
MPH 110 - 114 - 116 - 120
3/4”
1 1/4”
1”
0.16
0.12
0.08
0.04
0
MPH 250
0 120
240
360
480
600
1 1/4”
0.16
0.12
0.08
0.04
0
MPH 630
0 240 480 720
960
1200
1 1/2”
0.40
0.30
0.20
0.10
0
MPH 850
0
600
1200 1800
2400
3000
0.40
0.30
0.20
0.10
0
MPH 660
0
480
960 1440 1920
2400
4”
3”
DN 100
Valves
Bypass valve pressure drop
MPH 110 - 114 - 116 - 120
5
3.75
2.5
1.25
0
0
80 160
240 320 400
2.5 bar
1.75 bar
MPH 250
4
3
2
1
0
0
120 240
360
480 600
2.5 bar
1.75 bar
MPH 630 - 660
5
3.75
2.5
1.25
0
MPH 850
0 600 1200 1800 2400 300
0
6
4.5
3
1.5
0
0 240 480
720 960 1200
1.75 bar
2.5 bar
1.75 bar
Air breather
Pressure drop
MPH 110 - 114
0.02
0.015
0.01
0.005
0
0
60 120
180 240
300
1: C
With air breather 10 µm
2: D
With anti-splash and SAP50 10 µm
2
1
1
2
C With air breather 10 μm
D With anti-splash and SAP50 10 μm
The curves are plotted using mineral oil with density of 0.86 kg/dm
3
in compliance with ISO 3968. ∆p varies proportionally with density.
Flow rate l/min
Flow rate l/min
Flow rate l/min
Flow rate l/min
Flow rate l/min
Flow rate l/min
Flow rate l/min
Flow rate l/min
Flow rate l/min
∆p bar∆p bar∆p bar∆p bar
∆p bar∆p bar∆p bar∆p bar
∆p bar
0.1
0.075
0.05
0.025
0
0
80
160 240
320
400
MPH 110 - 114 - 116 - 120
3/4”
1 1/4”
1”
0.16
0.12
0.08
0.04
0
MPH 250
0 120
240
360
480
600
1 1/4”
0.16
0.12
0.08
0.04
0
MPH 630
0 240 480 720
960
1200
1 1/2”
0.40
0.30
0.20
0.10
0
MPH 850
0
600
1200 1800
2400
3000
0.40
0.30
0.20
0.10
0
MPH 660
0
480
960 1440 1920
2400
4”
3”
DN 100
Valves
Bypass valve pressure drop
MPH 110 - 114 - 116 - 120
5
3.75
2.5
1.25
0
0
80 160
240 320 400
2.5 bar
1.75 bar
MPH 250
4
3
2
1
0
0
120 240
360
480 600
2.5 bar
1.75 bar
MPH 630 - 660
5
3.75
2.5
1.25
0
MPH 850
0 600 1200 1800 2400 3000
6
4.5
3
1.5
0
0 240 480
720 960 1200
1.75 bar
2.5 bar
1.75 bar
Air breather
Pressure drop
MPH 110 - 114
0.02
0.015
0.01
0.005
0
0
60 120
180 240
300
1: C
With air breather 10 µm
2: D
With anti-splash and SAP50 10 µm
2
1
∆p kPa
Flow rate l
N
/min
Return lters
212
MPH
Return lters
213
MPH
Designation & Ordering code
MPH110
FILTER ELEMENT
Element series and size
Element length
MR100
Conguration example:
Seals
A
V
NBR
FPM
Execution
P01
Pxx
MP Filtri standard
Customized
MR100 1 AA10 P01
Length
Conguration example:
MPH110 1 D A10S G1A 1S P01
Series and size
MPH110
COMPLETE FILTER
Bypass valve
Diffuser and magnetic lter
S
D
O
EC
F
E
Without bypass
With diffuser, with magnetic lter
Without diffuser, with magnetic lter
2.5 bar1.75 bar
With diffuser, without magnetic lter
Without diffuser, without magnetic lter
Execution
P01
Pxx
MP Filtri standard
Customized
Seals and treatments
A
W
V
Axx Mxx Pxx
• •
•
•
•
•
•
• -
• -
•
Z
NBR
NBR
head anodized
head anodized
FPM
FPM
Filtration rating
Aux connection
0 1 2Not machined Aux size 1 Aux size 2
- see previous table
Main Connections Aux size 1 Aux size 2
G2
G1
G3
G4
G5
G6
G 1”
G 3/8” G 1/2”
G 3/4”
G 1 1/4”
3/4” NPT
1” NPT
3/8” NPT 1/2” NPT
1 1/4” NPT
Main Connections Aux size 1 Aux size 2
G7
G8
G9
SAE 12 - 1 1/16” - 12 UN
SAE 16 - 1 5/16” - 12 UN
SAE 6 - 9/16” - 18 UNF SAE 8 - 3/4” - 16 UNF
SAE 20 - 1 5/8” - 12 UN
Air breather
S
D
P
C
Without air breather
With anti-splash and air breather SAP050 10 µm
With anti-splash and air breather SAP050 10 µm
pressurization 0.5 bar
With air breather 10 µm
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
DPT Dipstick
BVA
BVP
BVR
BVQ
BEM
BEA
BLA
Axial pressure gauge
Visual pressure indicator with automatic reset
Radial pressure gauge
Visual pressure indicator with manual reset
Electrical pressure indicator
Electrical pressure indicator
Electrical / visual pressure indicator
1 2 3 4 5
1 2 3 4 5
CLOGGING INDICATORS
ADDITIONAL FEATURES
See page
See page
720-721
268
Return lters
214
MPHMPH110
1.6
0
.2
1
.6
0
.2
1.6
0
.2
1.6
0
.2
MPH110
Filter
length
H1
[mm]
H2
[mm]
1
2
3
4
5
188
188
238
338
438
255
255
305
405
505
with diffuser
MPH110
Filter
length
H1
[mm]
H2
[mm]
1
2
3
4
5
129
173
223
323
423
190
235
285
385
485
without diffuser
Dimensions
Connections T
G1-G2-G3
G4-G5-G6-G7-G8-G9
G 1/8”
1/8” NPT
Connections T
G1-G2-G3
G4-G5-G6-G7-G8-G9
G 1/8”
1/8” NPT
Holes on the tank
Holes on the tank
H2
Recommended
clearance space
for maintenance
H2
Recommended
clearance space
for maintenance
H1
Total length
immersed
in the tank
H1
Total length
immersed
in the tank
IN
IN
T - Connection for
clogging indicator
T - Connection for
clogging indicator
T - Connection for
clogging indicator
T - Connection for
clogging indicator
IN
IN
Nr. 2 blind holes
Nr. 2 blind holes
Versions
D / P
Versions
D / P
Version
C
Version
C
Version
S
Version
S
Flat sealFlat seal
Return lters
215
MPH
Designation & Ordering code
MPH114
FILTER ELEMENT
Element series and size
Element length
MR100
Conguration example:
Seals
A
V
NBR
FPM
Execution
P01
Pxx
MP Filtri standard
Customized
MR100 3 VM60 P01
Length
Conguration example:
MPH114 3 E M60C G6C Z P01
Series and size
MPH114
COMPLETE FILTER
Bypass valve
Diffuser and magnetic lter
S
D
O
EC
F
E
Without bypass
With diffuser, with magnetic lter
Without diffuser, with magnetic lter
2.5 bar1.75 bar
With diffuser, without magnetic lter
Without diffuser, without magnetic lter
Execution
P01
Pxx
MP Filtri standard
Customized
Seals and treatments
A
W
V
Axx Mxx Pxx
• •
•
•
•
•
•
•
•
•
Z
NBR
NBR
head anodized
head anodized
FPM
FPM
Filtration rating
Connections
G1
G3
G5
G2
G4
G 3/4”
G 1 1/4”
1” NPT
G 1”
3/4” NPT
G6
G8
G9
G7
1 1/4” NPT
SAE 16 - 1 5/16” - 12 UN
SAE 20 - 1 5/8” - 12 UN
SAE 12 - 1 1/16” - 12 UN
Air breather
S
D
P
C
Without air breather
With anti-splash and air breather SAP050 10 µm
With anti-splash and air breather SAP050 10 µm pressurization 0.5 bar
With air breather 10 µm
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
DPT Dipstick
BVA
BVP
BVR
BVQ
BEM
BEA
BLA
Axial pressure gauge
Visual pressure indicator with automatic reset
Radial pressure gauge
Visual pressure indicator with manual reset
Electrical pressure indicator
Electrical pressure indicator
Electrical / visual pressure indicator
-
-
1 2 3 4 5
1 2 3 4 5
CLOGGING INDICATORS
See page 720-721
ADDITIONAL FEATURES
See page 268
Return lters
216
1.6
0
.2
1.6
0
.2
MPHMPH114
Dimensions
1.6
0
.2
1.6
0
.2
MPH114
Filter
length
H1
[mm]
H2
[mm]
1
2
3
4
5
188
188
238
338
438
255
255
305
405
505
with diffuser
MPH114
Filter
length
H1
[mm]
H2
[mm]
1
2
3
4
5
129
173
223
323
423
190
235
285
385
485
without diffuser
Connections T
G1-G2-G3
G4-G5-G6-G7-G8-G9
G 1/8”
1/8” NPT
Connections T
G1-G2-G3
G4-G5-G6-G7-G8-G9
G 1/8”
1/8” NPT
Holes on the tank
Holes on the tank
T - Connection for
clogging indicator
T - Connection for
clogging indicator
IN
IN
Nr. 4 blind holes
Nr. 4 blind holes
Versions
D / P
Versions
D / P
Version
C
Version
C
Version
S
Version
S
Flat seal
Flat seal
H2
Recommended
clearance space
for maintenance
H2
Recommended
clearance space
for maintenance
H1
Total length
immersed
in the tank
H1
Total length
immersed
in the tank
Return lters
217
MPH MPH116
FILTER ELEMENT
Element series and size
Element length
MR100
Conguration example:
Seals
A
V
NBR
FPM
Execution
P01
Pxx
MP Filtri standard
Customized
MR100 5 AA10 P01
Length
Conguration example:
MPH116 5 D A10S G1S A P01
Series and size
MPH116
COMPLETE FILTER
Bypass valve
Diffuser and magnetic lter
S
D
O
EC
F
E
Without bypass
With diffuser, with magnetic lter
Without diffuser, with magnetic lter
2.5 bar1.75 bar
With diffuser, without magnetic lter
Without diffuser, without magnetic lter
Execution
P01
Pxx
MP Filtri standard
Customized
Seals and treatments
A
W
V
Axx Mxx Pxx
• •
•
•
•
•
•
•
•
•
Z
NBR
NBR
head anodized
head anodized
FPM
FPM
Filtration rating
Flat seal on the head on request
Connections
G1
G3
G5
G2
G4
G 3/4”
G 1 1/4”
1” NPT
G 1”
3/4” NPT
G6
G8
G9
G7
1 1/4” NPT
SAE 16 - 1 5/16” - 12 UN
SAE 20 - 1 5/8” - 12 UN
SAE 12 - 1 1/16” - 12 UN
Air breather
S Without air breather
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
DPT Dipstick
BVA
BVP
BVR
BVQ
BEM
BEA
BLA
Axial pressure gauge
Visual pressure indicator with automatic reset
Radial pressure gauge
Visual pressure indicator with manual reset
Electrical pressure indicator
Electrical pressure indicator
Electrical / visual pressure indicator
Designation & Ordering code
-
-
1 2 3 4 5
1 2 3 4 5
CLOGGING INDICATORS
See page 720-721
ADDITIONAL FEATURES
See page 268
Return lters
218
MPHMPH116
Dimensions
MPH116
Filter
length
H1
[mm]
H2
[mm]
1
2
3
4
5
190
190
240
340
440
255
255
305
405
505
with diffuser
MPH116
Filter
length
H1
[mm]
H2
[mm]
1
2
3
4
5
131
175
225
325
425
190
235
285
385
485
without diffuser
Connections T
G1-G2-G3
G4-G5-G6-G7-G8-G9
G 1/8”
1/8” NPT
Connections T
G1-G2-G3
G4-G5-G6-G7-G8-G9
G 1/8”
1/8” NPT
1.6
0
.1
1.6
0
.1
1.6
0
.1
1.6
0
.1
Holes on the tank
Option for 2 and 4 screws
Holes on the tank
Option for 2 and 4 screws
H2 - Recommended
clearance space
for maintenance
H2 - Recommended
clearance space
for maintenance
H1 - Total length
immersed in the tank
H1 - Total length
immersed in the tank
IN
IN
T - Connection for
clogging indicator
T - Connection for
clogging indicator
IN
IN
Nr. 2 blind holes
Nr. 2 blind holes
O-Ring seal
O-Ring seal
Nr. 4 blind holes at 90°
Nr. 4 blind holes at 90°
Return lters
219
MPH
Designation & Ordering code
MPH120
FILTER ELEMENT
Element series and size
Element length
MR100
Conguration example:
Seals
A
V
NBR
FPM
Execution
P01
Pxx
MP Filtri standard
Customized
MR100 1 AA10 P01
Length
Conguration example:
MPH120 1 D A10S G1 1A P01
Series and size
MPH120
COMPLETE FILTER
Bypass valve
Diffuser and magnetic lter
S
D
O
EC
F
E
Without bypass
With diffuser, with magnetic lter
Without diffuser, with magnetic lter
2.5 bar1.75 bar
With diffuser, without magnetic lter
Without diffuser, without magnetic lter
Execution
P01
Pxx
MP Filtri standard
Customized
Seals and treatments
A
W
V
Axx Mxx Pxx
• •
•
•
•
•
•
•
•
•
Z
NBR
NBR
head anodized
head anodized
FPM
FPM
Filtration rating
Aux connection
0 1 2Not machined Aux size 1 Aux size 2
- see previous table
Main Connections Rear connections Aux size 1 Aux size 2
G2
G1
G3
G4
G5
G6
G7
G8
G9
G 1” G 1”
G 3/8” G 1/2”
G 3/4” G 3/4”
G 3/4”G 1 1/4”
3/4” NPT 3/4” NPT
3/4” NPT
1” NPT 1” NPT 3/8” NPT 1/2” NPT
1 1/4” NPT
SAE 12 - 1 1/16” - 12 UN SAE 12 - 1 1/16” - 12 UN
SAE 12 - 1 1/16” - 12 UN
SAE 16 - 1 5/16” - 12 UN SAE 16 - 1 5/16” - 12 UN SAE 6 - 9/16” - 18 UNF SAE 8 - 3/4” - 16 UNF
SAE 20 - 1 5/8” - 12 UN
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
DPT Dipstick
BVA
BVP
BVR
BVQ
BEM
BEA
BLA
Axial pressure gauge
Visual pressure indicator with automatic reset
Radial pressure gauge
Visual pressure indicator with manual reset
Electrical pressure indicator
Electrical pressure indicator
Electrical / visual pressure indicator
-
-
1 2 3 4 5
1 2 3 4 5
CLOGGING INDICATORS
See page 720-721
ADDITIONAL FEATURES
See page 268
Return lters
220
MPHMPH120
1.6
0
.2
1.6
0
.2
1.6
0
.2
1.6
0
.2
MPH120
MPH120
Filter
length
H1
[mm]
H2
[mm]
1
2
3
4
5
129
173
223
323
423
190
235
285
385
485
Filter
length
H1
[mm]
H2
[mm]
1
2
3
4
5
188
188
238
338
438
255
255
305
405
505
with diffuser
without diffuser
Dimensions
Connections T
G1-G2-G3
G4-G5-G6-G7-G8-G9
G 1/8”
1/8” NPT
Connections T
G1-G2-G3
G4-G5-G6-G7-G8-G9
G 1/8”
1/8” NPT
Holes on the tank
Holes on the tank
Nr. 2 blind holes
Nr. 2 blind holes
H2
Recommended
clearance space
for maintenance
H2
Recommended
clearance space
for maintenance
H1
Total length
immersed
in the tank
H1
Total length
immersed
in the tank
T - Connection for
clogging indicator
T - Connection for
clogging indicator
T - Connection for
clogging indicator
T - Connection for
clogging indicator
IN
IN
IN
IN
IN
IN
Flat sealFlat seal
Return lters
221
MPH
Designation & Ordering code
MPH250
FILTER ELEMENT
Element series and size
Element length
MR250
Conguration example:
Seals
A
V
NBR
FPM
Execution
P01
Pxx
MP Filtri standard
Customized
MR250 1 AA10 P01
Length
Conguration example:
MPH250 1 D A10C A G1S P01
Series and size
MPH250
COMPLETE FILTER
Bypass valve
Diffuser and magnetic lter
S
D
O
EC
F
E
Without bypass
With diffuser, with magnetic lter
Without diffuser, with magnetic lter
2.5 bar1.75 bar
With diffuser, without magnetic lter
Without diffuser, without magnetic lter
Execution
P01
Pxx
MP Filtri standard
Customized
Seals and treatments
A
W
V
Axx Mxx Pxx
• •
•
•
•
•
•
•
•
•
Z
NBR
NBR
head anodized
head anodized
FPM
FPM
Filtration rating
Main Connections Rear connections
G2
G1
G4
G5
G7
G8
F1
F2
F3
F4
G 1 1/2” G 1 1/4”
G 1 1/2” -
-1 1/2” NPT
1 1/2” NPT 1 1/4” NPT
SAE 20 - 1 5/8” - 12 UN
SAE 24 - 1 7/8” - 12 UN -
SAE 24 - 1 7/8” - 12 UN
-
-
1 1/4” SAE 3000 psi/UNC
1 1/4” SAE 3000 psi/M
Air breather
S Without air breather
1 1/2” SAE 3000 psi/M
1 1/2” SAE 3000 psi/UNC
1 1/2” SAE 3000 psi/M
1 1/2” SAE 3000 psi/UNC
Filtration rating (lter media)
A03 M25
A10
M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber
Wire mesh
10 µm
90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
BVA
BVP
BVR
BVQ
BEM
BEA
BLA
Axial pressure gauge
Visual pressure indicator with automatic reset
Radial pressure gauge
Visual pressure indicator with manual reset
Electrical pressure indicator
Electrical pressure indicator
Electrical / visual pressure indicator
-
-
1 2 3 4
1 2 3 4
CLOGGING INDICATORS
See page 720-721
Return lters
222
MPHMPH250
MPH250
MPH250
Filter
length
H1
[mm]
H2
[mm]
H3
[mm]
1
2
3
4
182
231
302
502
247
247
317
507
255
305
375
580
Filter
length
H1
[mm]
H2
[mm]
H3
[mm]
1
2
3
4
182
231
302
502
247
247
317
507
255
305
375
580
Dimensions
1 connection port
2 connection ports
Connections
Connections
T
T
G1-G2-G3
G4-G5-G6-G7-G8-G9
G1-G2-G3
G4-G5-G6-G7-G8-G9
F1-F2
F3-F4
F1-F2
F3-F4
G 1/8”
1/8” NPT
G 1/8”
1/8” NPT
G 1/8”
1/8” NPT
G 1/8”
1/8” NPT
Holes on the tank
Holes on the tank
Nr. 4 holes
Nr. 4 holes
with diffuser
with diffuser
without diffuser
without diffuser
T - Connection for
clogging indicator
T - Connection for
clogging indicator
T - Connection for
clogging indicator
T - Connection for
clogging indicator
IN IN
IN
Flat seal
Flat seal
Return lters
223
MPH
Designation & Ordering code
MPH630
FILTER ELEMENT
Element series and size
Element length
MR630
Conguration example:
Seals
A
V
NBR
FPM
Execution
P01
Pxx
MP Filtri standard
Customized
MR630 1 AM25 P01
Series and size
COMPLETE FILTER
Diffuser and magnetic lter
D
O
F
E
With diffuser, with magnetic lter
Without diffuser, with magnetic lter
With diffuser, without magnetic lter
Without diffuser, without magnetic lter
Execution
P01
Pxx
MP Filtri standard
Customized
Seals and treatments
A
W
V
Axx Mxx Pxx
• •
•
•
•
•
•
•
•
•
Z
NBR
NBR
head anodized
head anodized
FPM
FPM
Filtration rating
Air breather
S Without air breather
MPH630
Filtration rating (lter media)
A03 M25
A10 M90
A06
M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber
Wire mesh
6 µm
60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
Length
Bypass valve
S ECWithout bypass 2.5 bar1.75 bar
Conguration example:
MPH630 1 E M25S W F1S P01
F2
F1
F3
F4
2 1/2” SAE 3000 psi/M -
2 1/2” SAE 3000 psi/UNC -
2 1/2” SAE 3000 psi/M 2” SAE 3000 psi/M
2 1/2” SAE 3000 psi/UNC 2” SAE 3000 psi/UNC
Main Connections Rear connections
-
-
1 2 3 4 5
1 2 3 4 5
BVA
BVP
BVR
BVQ
BEM
BEA
BLA
Axial pressure gauge
Visual pressure indicator with automatic reset
Radial pressure gauge
Visual pressure indicator with manual reset
Electrical pressure indicator
Electrical pressure indicator
Electrical / visual pressure indicator
CLOGGING INDICATORS
See page 720-721
Return lters
224
MPHMPH630
1.6
0
.2
1.6
0
.2
1.6
0
.2
MPH630
MPH630
Dimensions
Filter
length
H1
[mm]
H2
[mm]
H3
[mm]
1
2
3
4
5
260
340
440
528
829
278
358
458
548
848
330
410
510
600
900
Connections T
F1
F3
G 1/8”
1/8” NPT
Filter
length
H1
[mm]
H2
[mm]
H3
[mm]
1
2
3
4
5
260
340
440
528
829
278
358
458
548
848
330
410
510
600
900
Connections T
F2
F4
G 1/8”
1/8” NPT
Holes on the tank
Holes on the tank
Nr. 4 blind holes
Nr. 4 blind holes
with diffuserwith diffuser
without diffuserwithout diffuser
T - Connection for
clogging indicator
T - Connection for
clogging indicator
T - Connection for
clogging indicator
T - Connection for
clogging indicator
IN
IN
IN
Flat seal
Flat seal
1 connection port
2 connection ports
Return lters
225
MPH
Designation & Ordering code
MPH660
COMPLETE FILTER
FILTER ELEMENT
Element series and size
Element length
MR630
Conguration example:
Seals
A
V
NBR
FPM
Execution
P01
Pxx
MP Filtri standard
Customized
MR630 5 AM25 P01
Series and size
COMPLETE FILTER
Diffuser and magnetic lter
D
O
F
E
With diffuser, with magnetic lter
Without diffuser, with magnetic lter
With diffuser, without magnetic lter
Without diffuser, without magnetic lter
Execution
P01
Pxx
MP Filtri standard
Customized
Seals and treatments
A
W
V
Axx Mxx Pxx
• •
•
•
•
•
•
•
•
•
Z
NBR
NBR
head anodized
head anodized
FPM
FPM
Filtration rating
Air breather
S Without air breather
MPH660
Filtration rating (lter media)
A03 M25
A10 M90
A06
M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber
Wire mesh
6 µm
60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
Length
Bypass valve
S ECWithout bypass 2.5 bar1.75 bar
Conguration example:
MPH660 4 D A10C A F2S P01
F2
F1
3” SAE 3000 psi/M
4” SAE 3000 psi/M
Main Connections
-
-
4 5
4 5
BVA
BVP
BVR
BVQ
BEM
BEA
BLA
Axial pressure gauge
Visual pressure indicator with automatic reset
Radial pressure gauge
Visual pressure indicator with manual reset
Electrical pressure indicator
Electrical pressure indicator
Electrical / visual pressure indicator
CLOGGING INDICATORS
See page 720-721
Return lters
226
MPHMPH660
Dimensions
1.6
0
.2
MPH660
Filter
length
H1
[mm]
H2
[mm]
H3
[mm]
4
5
538
838
548
848
610
910
Holes on the tank
Nr. 4 blind holes
with diffuser
without diffuser
G 1/8” Connection for
clogging indicator
G 1/8” Connection for
clogging indicator
G 1/8” Connection for
clogging indicator
IN
Flat seal
Return lters
227
MPH
Designation & Ordering code
MPH850
FILTER ELEMENT
Element series and size
Element length
MR850
Conguration example:
Seals
A
V
NBR
FPM
Execution
P01
Pxx
MP Filtri standard
Customized
MR850 1 AA10 P01
Conguration example:
MPH850 1 DC F1 A10S A P01
Series and size
COMPLETE FILTER
Bypass valve
Diffuser and magnetic lter
S
D
O
C
F
E
Without bypass
With diffuser, with magnetic lter
Without diffuser, with magnetic lter
1.75 bar
With diffuser, without magnetic lter
Without diffuser, without magnetic lter
Execution
P01
Pxx
MP Filtri standard
Customized
Seals and treatments
A
W
V
Axx Mxx Pxx
• •
•
•
•
•
•
•
•
•
Z
NBR
NBR
head anodized
head anodized
FPM
FPM
Filtration rating
Air breather
S Without air breather
Main Connections Rear connections
F2
F1
F5
F7
F6
F8
MPH850
UNI 2223 DN 100 PN 10/16 3” SAE 3000 psi/M
Not machined
4” SAE 3000 psi/M
3” SAE 3000 psi/M
3” SAE 3000 psi/M
UNI 2223 DN 100 PN 10/16 3” SAE 3000 psi/UNC
Not machined
4” SAE 3000 psi/UNC
3” SAE 3000 psi/UNC
3” SAE 3000 psi/UNC
Length
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
Filtration rating (lter media)
A03 M25
A10 M90
A06 M60
A16 P10
A25 P25
Inorganic microber Wire mesh3 µm 25 µm
Inorganic microber Wire mesh10 µm 90 µm
Inorganic microber Wire mesh6 µm 60 µm
Inorganic microber Resin impregnated paper16 µm 10 µm
Inorganic microber Resin impregnated paper25 µm 25 µm
-
-
1 2 3 4
1 2 3 4
BVA
BVP
BVR
BVQ
BEM
BEA
BLA
Axial pressure gauge
Visual pressure indicator with automatic reset
Radial pressure gauge
Visual pressure indicator with manual reset
Electrical pressure indicator
Electrical pressure indicator
Electrical / visual pressure indicator
CLOGGING INDICATORS
See page 720-721
Return lters
228
MPHMPH850
Dimensions
1.6
0
.2
1.6
0
.2
1.6
0
.2
1.6
0
.2
MPH850
Filter
length
H1
[mm]
H2
[mm]
H3
[mm]
H4
[mm]
1
2
3
4
383
598
878
1143
419
634
914
1179
150
150
250
250
510
725
1005
1270
Connections UNI / SAE
MPH850
Filter
length
H1
[mm]
H2
[mm]
H3
[mm]
H4
[mm]
1
2
3
4
383
598
878
1143
419
634
914
1179
150
150
250
250
515
730
1010
1275
Connections SAE / SAE
Holes on the tank
Holes on the tank
Nr. 8 blind holes
Nr. 8 blind holes
H4 - Recommended
clearance space
for maintenance
H4 - Recommended
clearance space
for maintenance
H1 - without diffuser
Total length
immersed in the tank
H1 - without diffuser
Total length
immersed in the tank
H2 - with diffuser
Total length
immersed in the tank
H2 - with diffuser
Total length
immersed in the tank
IN
IN
IN
IN
Flat seal
Flat seal
G 1/8” Connection for
clogging indicator
G 1/8” Connection for
clogging indicator
Return lters
229
MPH SPARE PARTS
3c
3d
2
3a
3b
3e
3f
3c
3d
2
3a
3b
3e
3f
3g
3g
3i
3h
5
6
4
3h
3c
3d
2
3a
3b
3e
3f
MPH 120
MPH 110 - 114
MPH 116
Order number for spare parts
Filter
series
Seal Kit code number
Filter
element
Air breather  lter element - version:
NBR C D PFPM
MPH 110
MPH 114
02050565
02050582
02050566
02050583
10 µm
A3L03
10 µm
SAP50G3L03A0P01
10 µm
SAP50G3L03A1P01
See
order
table
Q.ty: 1 pc.Q.ty: 1 pc. Q.ty: 1 pc. Q.ty: 1 pc. Q.ty: 1 pc.
(3a ÷ 3i)
3
Item:
2
4 5 6
Seal Kit code number
NBR FPM
Filter
series
Filter
element
MPH 120 02050567 02050568
See
order
table
Q.ty: 1 pc.
(3a ÷ 3f)
3
Item:
Q.ty: 1 pc.
2
Filter
series
Seal Kit code numberFilter
element NBR FPM
MPH 116 02050741 02050742
See
order
table
Q.ty: 1 pc.
(3a ÷ 3f)
3
Item:
Q.ty: 1 pc.
2
Return  lters
230
MPHSPARE PARTS
3c
3d
1
2
3a
3b
3e
3c
3d
1
2
3a
3b
3e
3c
3d
2
3a
3b
3e
MPH 660 MPH 850
MPH 250 - 630
Filter
series
Seal Kit code numberFilter
element NBR FPM
MPH 660
MPH 850
02050153
02050155
02050154
02050156
See
order
table
Order number for spare parts
Q.ty: 1 pc.
(3a ÷ 3e)
3
Item:
Filter
series
Seal Kit code numberFilter
element NBR FPM
MPH 250
MPH 630
02050151
02050153
02050152
02050154
See
order
table
Q.ty: 1 pc.
(3a ÷ 3e)
3
Item:
Q.ty: 1 pc.
2
Q.ty: 1 pc.
2
Return  lters
231
•
RETURN FILTERSCLOGGING INDICATORS
Designation & Ordering code
Series
BE
BL
BV
Option
P01
Pxx
MP Filtri standard
Customized
Conguration example 1:
BE H 41A15 P01 EX
Conguration example 2:
BL HA
A
71A20 P01
Conguration example 3:
BV R 14 P01
Conguration example 4:
BV H P 20 P01
Type
A A
R
M
T
P
Q
Standard type Axial connection pressure gauge
Electrical pressure indicator
Radial connection pressure gauge
Visual pressure indicator
With wired electrical connection
With thermal switch
Electrical/Visual pressure indicator
Visual indicator with automatic reset
Visual indicator with manual reset
BAROMETRIC
(
PRESSURE
)
INDICATORS
•
•
-
-
•
Electrical connections BEA BEM BLBET
BE BL BV
50
30
41
10
51
53
52
71
Connection via four-core cable
Connection AMP Superseal series 1,5
•
•
•
•
•---
•-
-
-
-
-
-
-
-
-
- - -
- - -
•---
•---
Connection EN 175301-803
Connection Deutsch DT-04-2-P
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection EN 175301-803, transparent base with lamps 230 Vac
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
Pressure setting
14
20
15
25
1.4 bar
2.0 bar
1.5 bar
2.5 bar
Seals
Thermostat
H
A
F
HNBR
Without thermostat
With thermostat
•
•
-
-
-
-
-
•-
--
-•
•
-
-
• •• •
•
BEA-BEM BET
BE
BLA
BLA
BVA-BVR
BVA-BVR
BVP-BVQ
BVP-BVQ
•
BEA-BEM BLABET
• •
•- -
-
• •
Certications
EX
UL
Without
ATEX certication
UL certication
BEM-BET BL BVBEA
-
-
-
-
-
-
• •
•
•
•
•
Clogging Indicators
720
Series
Series
DE
T2
T4
DL
DV
DT
Option
P01
Pxx
MP Filtri standard
Customized
Conguration example 1:
DE HM 50F20 P01
Conguration example
T2 H
Conguration example 3:
Conguration example 2:
DL
DE
V
V
E
U
71
50
A
A
20
50
P01
P01 UL
Conguration example 4:
DT HA 70F20 P01
Conguration example 5:
DV VM 20 P01
Type
A A
U
M M
Pressure setting
12
20
25
1.2 bar
2.0 bar
2.5 bar
Standard type With automatic reset
Electrical differential pressure indicator
Plug
Plug
Standard type 210 bar, UL certied
Electrical differential pressure indicator
With wired electrical connection With manual reset
Electrical/Visual differential pressure indicator
Visual differential pressure indicator
DIFFERENTIAL PRESSURE INDICATORS
PLUGS
Seals
Seals
H
H
A
V
V
HNBR
HNBR
NBR
FPM
FPM
•
• •- - - - - --
•
•
• •- - - - - --
•
•
-• • • • • ••
•
-
•
-
•
•
-
-
Electrical connections
20
10
30
50
52
35
51
70
71
80
DL
DEA
DEA
DEA
T2
DE DT
DEM
DEM
DEM
T4
DV
• ••-
• •-•
• • •
• • -
DVADT DVMDESDEU DVSDL
DEA DVADTDEM DVMDESDEU DVSDL
•
•
• -
- •
• -
•
•-
•-
•-
•-
-
--
--
-
-
-
-
-
- -
DLE DTDESDEU DLA
••
• - -- -
- - -- -
• - -- -
- -
--
-
-
-
•
-- -
-
--
--
-
- -
-
-
-
-
--
--
--
•
•
•
•
•
DTDESDEU DLA DLE
• -•
--
••
• •-
Thermostat
A
F
Without thermostat
With thermostat
Connection Deutsch DT-04-2-P
Connection AMP Timer Junior
Connection AMP Superseal series 1.5
Connection Deutsch DT-04-3-P
Connection EN 175301-803
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection IEC 61076-2-101 D (M12)
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
Connection Stud #10-32 UNF
E
S
For high power supply
Compact version
-
•
•
-
-
-
S
With automatic reset
RETURN FILTERS CLOGGING INDICATORS
Designation & Ordering code
Certications
UL
Without
UL certication
OTHERSDEU
-
•
•
-
Clogging Indicators
721